Stanley Fmc641: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Stanley FMC641 Information

the information about the Stanley FMC641:

Introduction

The Stanley FMC641 is a 18-volt cordless impact driver that delivers up to 1,800 inch-pounds of torque. It features a variable speed trigger, a reversible rotation switch, and a 360-degree swivel head. The FMC641 is also equipped with a LED work light and an impact rated chuck.

Full specifications

Feature	Specification
Model	FMC641
Voltage	18V
Max Torque	1,800 inch-pounds
Impact Rate	0-3,200 impacts per minute
Speed	0-2,000 RPM
Chuck Size	1/2"
Weight	3.5 pounds

Features

• Variable speed trigger for precise control
• Reversible rotation switch for loosening or tightening fasteners
• 360-degree swivel head for increased versatility
• LED work light for improved visibility in low-light conditions
• Impact rated chuck for increased durability

What's in the box

• Stanley FMC641 impact driver
• (1) 18V battery
• (1) charger
• (1) bit holder
• (1) set of impact sockets
• Instruction manual

The Stanley FMC641 is a versatile and powerful impact driver that is ideal for a variety of tasks. It is perfect for professional and DIY users alike. The FMC641 is backed by a one-year warranty from Stanley.

Here are some additional pros and cons of the Stanley FMC641:

Pros:

• Powerful motor delivers up to 1,800 inch-pounds of torque
• Variable speed trigger for precise control
• Reversible rotation switch for loosening or tightening fasteners
• 360-degree swivel head for increased versatility
• LED work light for improved visibility in low-light conditions
• Impact rated chuck for increased durability
• Lightweight and compact design for easy handling
• Backed by a one-year warranty from Stanley

Cons:

• Battery not included (sold separately)
• No belt clip or carrying case included
• Some users have reported that the chuck can be difficult to tighten
• The impact driver can be a bit noisy

Overall, the Stanley FMC641 is a great option for users who are looking for a powerful and versatile impact driver. It is backed by a one-year warranty from Stanley and is available at a reasonable price.

Stanley FMC641 Compare with Similar Item

a table comparing the Stanley FMC641 to some similar items:

Feature	Stanley FMC641	DeWalt DW625K	Milwaukee 2627-20
Price	$59.99	$69.99	$79.99
Max cutting capacity	2x4 at 90 degrees	2x4 at 90 degrees	2x4 at 90 degrees
Bevel angle range	0-45 degrees	0-45 degrees	0-45 degrees
Laser guide	Yes	Yes	No
LED light	Yes	Yes	Yes
Dust collection port	Yes	Yes	Yes
Weight	5.7 pounds	6.1 pounds	6.3 pounds

As you can see, the Stanley FMC641 is the most affordable option, but it doesn't have a laser guide or LED light. The DeWalt DW625K is a bit more expensive, but it does have both of those features. The Milwaukee 2627-20 is the most expensive option, but it also has the highest max cutting capacity and a laser guide.

Ultimately, the best option for you will depend on your needs and budget. If you're looking for an affordable miter saw with basic features, the Stanley FMC641 is a good choice. If you want a miter saw with more features, such as a laser guide and LED light, the DeWalt DW625K or Milwaukee 2627-20 are better options.

Here is a more detailed comparison of the three miter saws:

• Stanley FMC641
  • Pros: Affordable, lightweight, dust collection port
  • Cons: No laser guide, no LED light, lower max cutting capacity
• DeWalt DW625K
  • Pros: Laser guide, LED light, dust collection port
  • Cons: Slightly more expensive than the Stanley FMC641
• Milwaukee 2627-20
  • Pros: Highest max cutting capacity, laser guide, LED light, dust collection port
  • Cons: Most expensive option

I hope this helps!

Stanley FMC641 Pros/Cons and My Thought

a summary of the Stanley FMC641 miter saw, including pros, cons, user reviews, and my thoughts:

Pros:

• Powerful 15-amp motor
• 12-inch dual bevel compound miter saw
• Laser guide for precise cuts
• Self-aligning miter detents
• Dust collection port
• Compact and lightweight design

Cons:

• No built-in stand
• Some users have reported issues with the laser guide
• Pricey

User reviews:

Overall, user reviews for the Stanley FMC641 are positive. Many users praise the saw's power, accuracy, and ease of use. Some users have noted that the laser guide is not as accurate as they would like, but overall, most users are satisfied with the saw.

My thoughts:

The Stanley FMC641 is a powerful and accurate miter saw that is well-suited for a variety of woodworking projects. The saw's 15-amp motor provides plenty of power for cutting through even the toughest materials, and the dual bevel compound miter design allows for precise cuts at any angle. The laser guide is a helpful addition, but it is not as accurate as some other laser guides on the market. Overall, the Stanley FMC641 is a great choice for a miter saw, especially for users who are looking for a powerful and accurate saw with a compact and lightweight design.

Here are some additional thoughts on the Stanley FMC641:

• The saw's compact design makes it easy to store and transport.
• The dust collection port helps to keep your work area clean.
• The self-aligning miter detents make it easy to make repeatable cuts.
• The saw comes with a 3-year warranty.

Overall, the Stanley FMC641 is a great choice for a miter saw. It is powerful, accurate, and easy to use. The saw's compact design and dust collection port are also welcome features. If you are looking for a miter saw that can handle a variety of woodworking projects, the Stanley FMC641 is a great option.

Stanley FMC641 Where To Buy

Here are some places where you can buy the Stanley FMC641 impact driver and spare parts:

• Stanley Direct: You can buy the impact driver and spare parts directly from Stanley's website. They offer free shipping on orders over $49.
• Walmart: Walmart sells the Stanley FMC641 impact driver for a good price. They also have a wide selection of spare parts available.
• Amazon: Amazon is another great place to buy the Stanley FMC641 impact driver. They often have the best prices, and they have a wide selection of spare parts available.
• Best Buy: Best Buy also sells the Stanley FMC641 impact driver. They offer free shipping on orders over $35.
• Lowes: Lowes sells the Stanley FMC641 impact driver. They offer free shipping on orders over $45.
• eBay: eBay is a good place to find used Stanley FMC641 impact drivers and spare parts. You can often find them for a good price.

Please note that some of these retailers may not ship to all countries. You can check their shipping policies to be sure.

I hope this helps!

Stanley FMC641 Problems and Solutions

some common issues and problems with the Stanley FMC641 drill press, along with expert-recommended solutions:

• The drill press won't start. This is often caused by a problem with the power cord or the switch. To check the power cord, make sure that it is plugged in tightly and that the breaker is not tripped. To check the switch, use a multimeter to test for continuity. If the switch is faulty, it will need to be replaced.
• The drill press is not drilling straight. This can be caused by a number of factors, including a bent drill bit, a loose chuck, or a misalignment of the drill press table. To check the drill bit, use a straightedge to make sure that it is not bent. To tighten the chuck, use a wrench to turn the chuck nut clockwise. To align the drill press table, loosen the table mounting screws and adjust the table until it is level.
• The drill press is making noise. This can be caused by a number of factors, including worn bearings, a loose belt, or a misalignment of the drill press head. To check the bearings, listen for any grinding or rattling noises. If the bearings are worn, they will need to be replaced. To tighten the belt, use a wrench to turn the belt tensioner clockwise. To align the drill press head, loosen the head mounting screws and adjust the head until it is level.
• The drill press is smoking. This is a serious problem and should be addressed immediately. Smoking can be caused by a number of factors, including overheating, a short circuit, or a fire. If you see smoke coming from your drill press, turn it off immediately and unplug it from the power outlet. Do not attempt to use the drill press until you have determined the cause of the smoke and have taken steps to correct it.

Here are some additional tips for troubleshooting Stanley FMC641 drill press problems:

• Check the owner's manual. The owner's manual will typically contain troubleshooting information for common problems.
• Consult an expert. If you are unable to troubleshoot the problem yourself, you may need to consult an expert, such as a qualified technician or a repair shop.
• Use genuine Stanley parts. When replacing parts on your Stanley FMC641 drill press, it is important to use genuine Stanley parts. Using counterfeit or low-quality parts can void your warranty and may even lead to further problems.

I hope this information is helpful. Please let me know if you have any other questions.

Stanley FMC641 Manual

Stanley FMC641 Manual

Safety Information

• Read all safety warnings and instructions before using this tool.
• Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/or serious injury.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Wear safety glasses and other personal protective equipment appropriate for the work being performed.
• Use only the accessories and attachments specified by the manufacturer for your tool.
• Do not modify the tool in any way.
• Disconnect the battery from the tool before making any adjustments or repairs.
• Store the tool in a safe place when not in use.

Before Use

• Make sure the battery is fully charged before using the tool.
• Select the correct drill bit for the material you are working with.
• Use the correct speed setting for the material you are working with.
• Do not overload the tool.
• Allow the tool to cool down before storing it.

Troubleshooting

• If the tool does not work, make sure the battery is properly inserted and charged.
• If the tool still does not work, contact Stanley customer service for assistance.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool for signs of wear or damage before each use.
• Replace worn or damaged parts immediately.
• Store the tool in a safe place when not in use.

Warranty

This tool is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If the tool fails during the warranty period, Stanley will repair or replace it, free of charge.

Contact Information

Stanley 1 Stanley Drive New Britain, CT 06053 1-800-828-7669 www.stanleytools.com

Additional Information

• This tool is intended for household use only.
• Do not use the tool in a commercial or industrial setting.
• Do not use the tool in wet or damp conditions.
• Do not use the tool for any purpose other than its intended use.
• By using this tool, you agree to the terms and conditions of the warranty.